<![CDATA[Make This : Do That]]>https://www.podcasts.com/make-this-do-that-e561c42e9<![CDATA[Make This : Do That]]>https://www.podcasts.com/make-this-do-that-e561c42e9https://s3.amazonaws.com/podcasts-image-uploads/make-this-do-that-e561c42e9-large.jpgpodcast@makethisdothat.orgNoNoen-US<![CDATA[Make This : Do That Episode 003 - Leah Hamel]]>Leah's website: leahmariehamel.com

- Abroms-Engels Institute for Visual Arts 

-Studio by the Tracks

-Birmingham Museum of Art

-Vinegar

Make This: Do That Contact:
email: podcast@makethisdothat.org
voicemail: ?(612) 276-2473?

]]>Leah's website: leahmariehamel.com

- Abroms-Engels Institute for Visual Arts 

-Studio by the Tracks

-Birmingham Museum of Art

-Vinegar

Make This: Do That Contact:
email: podcast@makethisdothat.org
voicemail: ?(612) 276-2473?

]]>https://www.podcasts.com/make-this-do-that-e561c42e9/episode/Make-This-Do-That-Episode-003-Leah-Hamel-4709Fri, 22 May 2020 22:26:35 +0000Michael Lorsung Michael Lorsung Full22:00Make-This-Do-That-Episode-003-Leah-Hamel-4709<![CDATA[Make This : Do That Episode 002 - Andrew Barger]]>
  • Images of Andrew's current space for reference.
  • A design for a simple sled for cutting miters on a table saw. This design can be adapted to a variety of saws and will allow the user to cut accurate, repeatable miters.
  • A design for an out-feed setup. This kind of design can be adapted to a variety of saws. It would also be adaptable to build an extension wing off the side of the table.
  • We discussed a number of options for dust collection and control in a small shop environment. Wood Magazine has an article that runs through a variety of options here. Below is a short list of options, it is by no means complete, but it might point you in the right direction.
  • Festool's line of dust extraction offers a variety of solutions that are directly compatible with their ecosystem of tools and can be adapted to be used with the offerings of other manufacturers.
  • Makita, Fein, and Metabo all have their own line of dust collection similar to what Festool offers.
  • For dealing with the uninsulated, single-pane windows that Andrew has in his space we recommended a 3M Window Insulation kit
    • ]]>
  • Images of Andrew's current space for reference.
  • A design for a simple sled for cutting miters on a table saw. This design can be adapted to a variety of saws and will allow the user to cut accurate, repeatable miters.
  • A design for an out-feed setup. This kind of design can be adapted to a variety of saws. It would also be adaptable to build an extension wing off the side of the table.
  • We discussed a number of options for dust collection and control in a small shop environment. Wood Magazine has an article that runs through a variety of options here. Below is a short list of options, it is by no means complete, but it might point you in the right direction.
  • Festool's line of dust extraction offers a variety of solutions that are directly compatible with their ecosystem of tools and can be adapted to be used with the offerings of other manufacturers.
  • Makita, Fein, and Metabo all have their own line of dust collection similar to what Festool offers.
  • For dealing with the uninsulated, single-pane windows that Andrew has in his space we recommended a 3M Window Insulation kit
    • ]]>    https://www.podcasts.com/make-this-do-that-e561c42e9/episode/Make-This-Do-That-Episode-002-Andrew-Barger-1943Wed, 30 Jan 2019 17:57:35 +0000Michael Lorsung Michael Lorsung Full49:44Make-This-Do-That-Episode-002-Andrew-Barger-1943    <![CDATA[Make This : Do That Episode 001 - Daniel King]]>Michael Lorsung Michael Lorsung Full35:56Make-This-Do-That-Episode-001-Daniel-King-bbffnoFri, 22 May 2020 22:26:35 +0000